Page 196 - Catalogo Sicutool Utensili 2013 - Versione inglese con prezzi

196 TORQUE WRENCHES WITHOUT SCALE
3
196
Prices in EURO - VAT not included
803GA
803GB
9x12
Orig. Torqueleader
Model without scale. High precision tightening on pre-set torque value. Long-lasting serial
tightening. Automatic reset. Automatic disconnection through angled movement at 20° of the rod.
"TBN" torque wrenches must be preset directly on the place of use by means of suitable torque
testers Art. 793 GA-B-C or 793 GT and fixed on the desired value within the tightening range of
the wrenches mentioned below. Bi-directional tightening.
Supplied with test certificate as per DIN ISO 6789.
± 6% tolerance of the scale set torque. Type with 9x12mm end fittings frontal connection.
Art...................................... 803GA 803GB
Clamping capacity Nm 0,2-2 1-10
Clamping capacity lbf.in 1,8-18 9-89
Total length mm 135 135
Weight Kg 0,15 0,15
Supplier code..................... TBN 2 E G TBN 10 E G
Each 288,00 300,00
For use with torque testers Art. 793 GA-B-C, heads Art. 806 GD 1/4 - 3/8 or Art. 806 GE 1/4 - 3/8 are required.
For use with torque testers Art. 793 GT, heads Art. 806 GD 1/4" or Art. 806 GE 1/4" are required.
vuoto
TORQUEWRENCHESWITHOUTSCALE
803GC
803GD
803GE
803GF
new
14x18 9x12
Model without scale. High precision tightening on pre-set torque value. Long-lasting serial
tightening. Automatic reset. Automatic disconnection through angled movement at 20° of the rod.
"TBN" torque wrenches must be preset directly on the place of use by means of suitable torque
testers Art. 793 GD (only for Art. 803 GC), 793 GL-T and fixed on the desired value within the
tightening range of the wrenches mentioned below. Bi-directional tightening.
Supplied with test certificate as per DIN ISO 6789.
Tolerance: ± 4% for each capacity reading.
Type with frontal connection of inserts.
Art...................................... 803GC 803GD 803GE 803GF
Insert Joint mm 9x12 9x12 9x12 14x18
Clamping capacity Nm 5-25 10-65 20-135 40-200
Clamping capacity lbf.in 44-221 89-575 177-1195 29-147
Total length mm 265 302 408 510
Weight Kg 0,40 0,75 1,03 1,4
Supplier code..................... TBN 25 E G TBN 65 E G TBN 135 E G TBN 200 G
Each 325,00 377,00 410,00 543,00
vuoto
When using with calibrating device Art. 793 GD, use inserts Art. 806 GD 1/4 - 3/8 or Art. 806 GE 1/4 - 3/8.
When using with calibrating devices Art. 793 GL, use inserts Art. 806 GD 3/8 - 1/2 or Art. 806 GE 3/8 - 1/2.
vuoto
TORQUEWRENCHESWITHOUTSCALE
803GL
803GM
803GP
803GPE
new
16
Model without scale. High precision tightening on pre-set torque value. Long-lasting serial
tightening. Automatic reset. Automatic disconnection through angled movement at 20° of the rod.
"TBN" torque wrenches must be preset directly on the place of use by means of suitable torque
testers Art. 793 GD (only for Art. 803 GL), 793 GL-T and fixed on the desired value within the
tightening range of the wrenches mentioned below. Bi-directional tightening.
Supplied with test certificate as per DIN ISO 6789.
± 4% tolerance of the scale set torque. Type with straight end fitting with male pin Ø 16mm.
Art...................................... 803GL 803GM 803GP 803GPE
Clamping capacity Nm 5-25 10-65 20-135 40-200
Clamping capacity lbf.in 44-221 89-575 177-1195 29-147
Total length mm 265 302 408 520
Weight Kg 0,40 0,75 1,03 1,4
Supplier code..................... TBN 25 E TBN 65 E TBN 135 E TBN 200
Each 312,00 363,00 394,00 516,00
vuoto
When using with calibrating device Art. 793 GD, use inserts Art. 809 GR 3/8.
When using with calibration devices Art. 793 GL, use inserts Art. 809 GL-R-S.
When using with calibrating device Art. 793 GT, use inserts Art. 809
TORQUEWRENCHESWITHOUTSCALE