794G 12R

DIN ISO 6789 | UNI EN ISO 6789

Slip type.
Rubber-coated ergonomic handle.
Tightening adjustment on the handle front side through locking ring nut after setting of the desired torque value. ± 6% tolerance of the scale set value. Scale graduation with readings in cNm/Nm.
After tightening the handle turns idle. Bi-directional tightening.
ESD approved. Supplied with test certificate as per DIN ISO 6789.

1/4" female hex drive for bits and 1/4" male square socket adapter.

The Art. 794 G 12M - 12P - 12R can use the sliding lever Art. 946 GR.